PERFORMANCE OF DURABILITY CHARACTERISTICS ON HIGH STRENGTH CONCRETE USING NANO CLAY, RED MUD AND SILICA FUME ADMIXTURES
Abstract
The paper deals with the performance of durability characteristics using Nano clay,
red mud and silica fume to produce a high strength concrete. This study is mainly concentrated
on the durability characteristics of HSC with some percentage replacement of cement by red
mud, nano clay and silica fume. The cement was replaced with 75% to 60% at 2.5% interval by
mineral admixture such as red mud, nano clay and silica fume. Water cement ratio is kept
constant for all mixtures. The main aim of paper is to be found out the acid and chloride resisting
capacity of the specimens. The result shows that the combination of third sample produced 20%
more resisting capacity of acid and chloride immersion compared with other samples from the
experimental.
Downloads
Author(s) and co-author(s) jointly and severally represent and warrant that the Article is original with the author(s) and does not infringe any copyright or violate any other right of any third parties, and that the Article has not been published elsewhere. Author(s) agree to the terms that the IJRDO Journal will have the full right to remove the published article on any misconduct found in the published article.